|
This full size panel (260mm high x 160mm wide) is the core of the package. It displays or monitors the following:
- · battery voltage (from both service and starter battery
- · battery current
- · control of a remote battery isolator switch
- The above information is gathered from the DC link box that also provides primary fuse protection for the DC system.
- · AC voltage
- · AC current
- · Indication of availability of AC supplies and which one is in use.
- The above information is gathered from the AC Auto change over unit. The Auto change over unit incorporates a change over contactor to select between shorepower and generator (if fitted) and a load shedding contactor to disconnect heavy consumers when operating on inverter only.
- · Fuull remote control of the Victron MultiPlus is provided.
- · Backlight and panel control. This turns the backlighting and displays on and off. There are outputs to other ESP panels that allow this switch to control the backlighting and displays of other panels in the range.
- The Victron MultiPlus Shore current limiter setting can be set using a rotary dial.
|
